Steve Meade is a certified car stereo addict. Steve has been building boxes and installing all his friends systems for 23 years. Steve likes to compete in sound competitions. Steve’s has been doing this about 4 years and still running. What type of vehicle does Steve drive? He drives a custom SMD 2001 Tahoe with 26 inch Rims and a crazy custom paint job called “Meade Cherry.” Steve has mean system in his Tahoe. It will blow your mind! The Tahoe has 4 18 inch SMD subwoofers made by AA. The subwoofers are powered by 4 beastly Rockford Fosgate T2500. The peak power on these Amplifiers is 2500 @ 1 OHM. The Tahoe also has 18 speakers and 18 tweeters that a total of 38 speakers in the front seats. To power all those speakers you need bad ass amplifiers. It called a Rockford Fosgate T1000 the peak power is around 1000 watts. How does he control all those Amplifiers? The Tahoe has 2 Rockford Fosgate 3-sixty. What is a Rockford Fosgate 3sixty do? It’s a Interactive signal processor, which it expands and fine-tunes your stereo system. Your have a problem asking your self this, How is he powering all those amps and speaker? Well I have 5 words for you. A lot of alternators and batteries. The Tahoe has 10 XS power batteries, so amplifiers will have constant Power and the wont half to worry about the amplifier going dry. How doe he keep his batteries charged? Well under the hood there is 4 300+ Amps alternators. If you would like to see the Steve Meade yourself go to his website www.StevemeadeDesigns.com, follow him on twitter http://twitter.com/meade916 or watch his videos on Youtube.com/meade916.
This page is dedicated to improving your car audio. I will talk about instalation and give you my product picks to give you the ultimate experience in car audio. Get ready to be blown away! Please Enjoy! AJW Customs
How To take a nasty carpet and make it new again
What Will You Need?
1. Power Washer
2. Bucket
3. Dishwasher soap
4. Degreaser
5. 2 Scrubbing Pad.
6. Some tools To Remove the seats in your Vehicle.
Steps:
1. Remove your seats your car or tuck. If your seat powered and not manual. You will need to unplug your battery thermals so your airbag won’t deploy.
2. Take the carpet out the car or truck.
3. Put it on the carpet on the ground
4. Then take the your Degreaser and spray on spots that need it most like “were the seats were”
5. Take the scrubbing pad and start scrubbing for about 1 minute were you spray the digresser.
(Wait 30 minutes to let the degreaser work its magic)
6. Then take your power washer and spay it on the spot were your digresser was sprayed and watch all those nasty toxics go away.
7. Now take your bucket and fill it with water and dishwasher Soap.
8. Scrub your carpet with your scrubbing pad and soapy water. (Take your time!)
9. Now take power washer and wash all the soap off the carpet.
10. Now you will need to dry your carpet with towels.
11. Now you need to wait a good 3-4 days.
12. Then install you carpet back into your car or truck.
Subscribe to:
Posts (Atom)